If your question isn’t covered here, send us a message using the form below or email us at contact@primorabio.com
Primora Bio™ Usage Questions
How does Primora Bio support crop performance?
- Improved root development
- Enhanced plant architecture
- Increased stress tolerance
- Greater nutrient-use efficiency
- Reduced reliance on excessive chemical inputs over time
Results vary depending on soil condition, crop type, and application protocol.
How do I use Primora Bio for foliar spraying?
General dilution guidelines:
- 1 oz per 2.5 gallons of water
- Approximate ratio: 1:333
For large-scale spraying:
- ~0.6 mL per liter
- 1 quart per 80 gallons
Always mix thoroughly before application.
How do I use Primora Bio for soil irrigation?
Small-medium scale guidance:
- 4 mL per gallon of water
- 1 oz per 2.5 gallons
- 1 quart per 80 gallons
- Apply prior to planting or during irrigation
For large-scale agricultural use, final field dilution typically approaches ~1:1700.
How often should it be applied?
Foliar spraying: Typically once weekly during active growth cycles.
Soil irrigation: Often applied as a seasonal intervention, and in some cases only once every 4–5 years depending on soil condition
Application frequency varies by crop, soil health, and growing system.
Can I use it with fertilizer?
Yes.
Primora Bio can be applied:
- Before fertilizer
- At the same time
- Or after fertilizer
It does not replace fertilizer but may support improved nutrient-use efficiency over time.
Can I use it in seed germination?
Yes.
For seed soaking:
- Soak seeds in treated water for 24–48 hours
- Plant once sprouting begins
This method is commonly used in small-scale and garden applications.
Can I use it in drip irrigation systems?
Yes.
Primora Bio can be:
- Mixed directly into small tanks
- Injected into drip systems
- Used in fertigation setups
Always mix thoroughly before system injection.
How much product do I need per acre?
Typical seasonal use:
Healthy soil (foliar only):
~12 liters per acre per season
Depleted soil (soil + foliar):
~24 liters per acre per season
Actual use depends on crop and soil condition
Can it be used on turf, vineyards, and orchards?
Yes.
For perennial systems:
- Foliar spraying is typically used for canopy support and stress tolerance.
- Soil irrigation is usually a one-time or infrequent intervention.
Should I adjust dilution for poor soil?
Yes.
For depleted soils:
- Consider combining soil irrigation and foliar spray during the first season.
- After recovery, maintenance often shifts to foliar-only applications.
Can I overdose it?
Primora Bio works at low concentrations.
Using significantly higher concentrations does not necessarily improve results and increases cost per acre.
Follow recommended dilution guidelines for best performance.
Does it need special mixing equipment?
No.
- Shake container before use.
- Mix directly into water.
- No activation step required.
For large sprayers, concentrate stock solutions may be used.
Primora Bio™ Info Questions
What is Primora Bio™?
Primora Bio is a mineral-based water conditioning concentrate designed for agricultural use.
It works by conditioning irrigation and spray water to support improved mineral mobility, nutrient availability, and biological coordination in soil and crops.
Primora Bio does not act as a fertilizer, pesticide, or amendment — It conditions water — which may support improved mineral mobility and biological coordination in soils.
What does “coherent” or “structured” water mean?
Water can behave differently depending on its mineral interactions.
When water interacts with diverse sulfated mineral systems, its molecular organization may become more coordinated. This condition is often described as “coherent” or “structured” water.
Primora Bio is formulated to help recreate this condition in modern irrigation systems.
Does Primora Bio add nutrients to soil?
Primora Bio contains trace ionic minerals, but its primary function is water conditioning — not nutrient supplementation.
It is designed to support more efficient use of nutrients already present in soil systems.
What does "living water"mean?
“Living water” is a traditional term used to describe water that has interacted with mineral-rich geological environments.
In modern scientific language, this is often described as structured or coherent water — referring to coordinated molecular behavior influenced by mineral interactions
Primora Bio is formulated to help recreate this condition in agricultural water systems.
Why is Aluminium in Primora Bio™
Primora Bio™ contains aluminum because it’s part of the naturally occurring mineral complex extracted from biotite black mica, a volcanic rock in the aluminosilicate family—the same category as zeolites and bentonite clay. These types of minerals naturally contain aluminum bound with silica and other elements.
There’s a lot of misunderstanding about aluminum, but it’s important to know that not all aluminum is the same. When aluminum is part of an aluminosilicate, like in clays or zeolites, it’s bound in a stable, natural form—and that’s exactly what you’re getting in Primora Bio™.
The aluminum in Primora Bio™ is in its ionic form, specifically aluminum sulfated, which is a natural mineral salt. It works with other minerals like iron to purify water through a process called flocculation—binding to contaminants so they can be removed during filtration.
This mineral complex is not man-made or chemically altered. It comes straight from nature, and has been used safely and effectively for centuries in traditional water treatment methods.
So while aluminum is present, it’s not the synthetic or harmful type people worry about—it’s part of a natural, balanced mineral system that helps purify your water.
Isn’t aluminium toxic?
There's a significant difference between metallic aluminum used in industrial products like cosmetics and cans and the naturally occurring aluminum found in clays, rocks, and minerals such as biotite and zeolites.
Many elements, including aluminum, exist in different forms—some of which can be harmful, while others are completely safe and even beneficial.
Primora Bio™ contains aluminum as part of a naturally occurring mineral complex derived from biotite mica, an aluminosilicate mineral similar to zeolites, which also naturally contain aluminum.
- Metallic Aluminum: Extracted and processed from bauxite ore, this form is used in packaging, cosmetics, and industrial products. Prolonged exposure to certain applications of metallic aluminum has raised health concerns.
- Naturally Occurring Aluminum: Found in minerals like biotite and zeolites, this form is chemically bound with other elements in a stable, natural state. It is safe and has been used for centuries in water purification.
The aluminum in Primora Bio™ is not extracted or isolated. Instead, it exists naturally as part of an ionic sulfated mineral compound, which works to bind and remove impurities from water safely and effectively.
Is aluminium a heavy metal ?
No, aluminum is not classified as a heavy metal. Heavy metals, like lead, mercury, and cadmium, are defined by their high density and potential toxicity, even in small amounts.
Aluminum, in contrast, is a lightweight, abundant element that naturally occurs in the Earth’s crust.
Furthermore, the aluminum inside of Primora Bio is not elemental metallic aluminum; it's aluminum sulfate, a naturally occurring mineral salt similar to that found in many popular detox clays and zeolites.
Does Primora Bio™ expire?
Primora Bio™ does not have an expiration date. When stored properly, in a dry place between 40–90°F, it remains effective indefinitely.
Orders and Returns
Can I order your product internationally ?
Yes, we do ship internationally. Please contact us at contact@primorabio.com to request a shipping quote for your order. Once the quote is confirmed, we will send you an invoice for payment.
How fast do you process orders?
Most orders are processed and shipped within 24–48 hours, barring any discrepancies such as missing address details or other vital shipping information. We typically ship orders on Monday, Wednesday, and Friday.
Orders placed after noon on Friday will most likely ship the following Monday.
What Should I do if my package says ’delivered’ but I didn’t get it?
We apologize if you have not received your order(s) as indicated. If your tracking information states that your package was delivered but you cannot locate it -
The carrier may have placed it in a safer location, please check:
- Mailbox, porch, garage, exterior doors, and any locations where the package could be placed.
- Check your mailbox again as some packages come separately from your regular mail.
- Check with others in your house that may have accepted it or with neighbors.
In rare cases, packages may show as 'delivered' but could take additional 24 – 72 hours. If it has been over 72 hours from the 'delivered' status and you still have not received your package please reach out to the shipping carrier used and file a Missing Package Claim via phone or online here:
USPS Missing Package Claim: https://www.usps.com/help/claims.htm
UPS Missing Package Claim: https://www.ups.com/us/en/support/file-a-claim.page
- Primora Bio is not responsible for lost or stolen packages confirmed to be delivered to the address entered for an order. Upon inquiry, Primora Bio will confirm delivery to the provided address, date of delivery, tracking information, and shipping carrier information for the customer to investigate.
What is your return policy?
We accept returns of unopened, unused, or damaged products within 30 days of the shipment date. All returns must be approved in advance and require a Return Authorization Number (RA#). Customers are responsible for return shipping unless the item was defective or damaged upon arrival.
- Items must be returned in original condition and packaging.
- International customers are responsible for duties or return-related fees.
- Shipping costs are non-refundable.
How do I return an item?
To return a product, follow these steps:
- Review our Return Policy to make sure your item qualifies for a return.
- Request a Return Authorization Number (RA#): Email us at contact@primorabio.com to receive your RA#. This number is required for all returns or exchanges.
After receiving your RA#, please follow the instructions on the Primora Bio Merchandise Return Form for packaging, labeling, and shipping your return properly.
Got a New Question?
Use the form below to reach out, and we’ll get back to you as soon as possible!